价 格
订货量
￥5978.00
1 - 9
￥5853.00
价格为商家提供的参考价，请通过"获取最低报价"
获得您最满意的心理价位~
≥10
| 产品特性：测量精度准 | 是否进口：否 | 产地：日本 |
| 加工定制：是 | 品牌：Fuji/富士 | 型号：FCST1000(M)F) |
| 类型：质量流量计 | 测量范围：0-2000m3/h | 订货号：6FEW |
| 货号：MFC12 | 精度等级：±0.5％F.S.(20slm 30slm ±2％F.S.) | 公称通径：3-24.5mm |
| 适用介质：各种气体 | 工作压力：10MPa | 工作温度：50℃ |
| 规格：齐全 | 是否跨境货源：否 |
High Performance & High ReliabilityImproved Zero point StabilityInput/Output SignalAnalog/RS-485, DeviceNet鈩� and EtherCAT (future)Response time<1sec for any given set pointProgressive PIDSeal MaterialsBoth Metal Seal and Elastomer Seal are availableSpecification
| Model Number | FCST1005锛圡锛塅/TM1005锛圡锛塅 FCST1005锛圡锛塅D/TM1005锛圡锛塅D | FCST1030锛圡锛塅/TM1030锛圡锛塅 FCST1030锛圡锛塅D/TM1030锛圡锛塅D | FCST1050锛圡锛塅/TM1050锛圡锛塅 FCST1050锛圡锛塅D/TM1050锛圡锛塅D |
|---|---|---|---|
| Flow Range (N2 Equivalent) | 10,20,30,50, 100,200,300,500SCCM 1,2,3,5SLM | 10,20,30SLM | 40,50SLM |
| Valve Type | N/O: Normally Open, N/C: Normally Closed | ||
| Controlled Volume Range | 2%锝�***F.S. | ||
| Flow Accuracy | 卤1% F.S. (Accuracy guaranteed between 15 ~ 35潞C) | ||
| Setting Signal | 0.1 ~ 5VDC | ||
| Output Signal | 0 ~ 5VDC | ||
| Repeatability | 卤0.2%F.S. | ||
| Response Time | 鈮�1sec | ||
| Required Pressure Difference | 50 ~ 300kPa | NO 50 ~ 300kPa (6SLM ~ 10SLM) ***00 ~ 300kPa (11SLM ~ 20SLM) NC 150 ~ 300kPa (21SLM ~ 30SLM) NC 50 ~ 300kPa ( 6SLM ~ 10SLM) NC 100 ~ 300kPa (11SLM ~ 30SLM) | 200 ~ 300kPa |
| MAX Operating Pressure | 400kPaG | ||
| Proof Pressure | 1MPaG | ||
| Guaranteed Operating Temperature Range | 5 ~ 50鈩� | ||
| External Leak Rate | Metal Seal锛� 1脳10-11Pa銌峬3/sec He銆丒lastomer Seal锛� 1脳10-7Pa銌峬3/sec He | ||
| Mounting Orientation | Can be mounted in any orientation | ||
| Current Consumption | T1000F +15VDC锛�50mA銆�-15VDC锛�200mA T1000FD +11 ~ +24VDC銆�5.5VA (5.5W) | ||
| Communication | Analog 0 ~ 5V DC, Digital: RS485 (Fujikin Protocol), DeviceNetTM | ||
| Wetted Surface Material | 316L SS, Magnetic Stainless Steel, PTFE | ||
| Seal Material | Metal Seal: SUS316L, Elastomer Seal: Fluoro-Rubber (Chloroprene Rubber) | ||
| Actuator Type | Solenoid actuator | ||
| Surface Finish | None (Option: EP) | ||
| Fittings | 1/4鈥� UJR, 1/4鈥� F900, 1/4鈥� 1.5 Wseal庐, 1/4鈥� 1.125 Wseal庐, 1/4鈥� 1.125 Cseal | ||
| Digital Communication | RS-485, Standard transmission rate 38400bps, Maximum connected units 127 | ||
鈥籘his specification is for MFC.*1 At Fujikin, flow rates (SCCM, SLM) are converted to values at 0潞C, 101.3kPa abs (1atm) for calibration.*2 Reference temperature for temperature coefficient is 25潞C.*3 Response time on SPEC sheet is the time to reach from minimum flow rate to 卤2%F.S of setting flow rate.
